PMC Motion Controller Accessories - Interconnection Boards
|
To reduce overall system cost and ensure off-the-shelf availability, all PMC motion controllers use low-cost industry standard connectors and cables. Hardware accessories for PMC motion controllers include:
- Cable Interconnection Boards
- Screw Terminal Boards
- Cables
- Power Supply Options
- Mounting Options
|
 |
Interconnection Boards for MultiFlex PCI Series Motion Controllers
|
ADAM-3968 Wiring Terminal Board |
|
ADAM-3968: Wiring Terminal Board
for the MultiFlex and DCX-PCI300-H controller families
(click image to enlarge)
|
Part Number |
ADAM-3968 |
| Description |
Low-cost universal 68-pin SCSI wiring terminal board with DIN-rail mount. One ADAM-3968 accommodates up to 2 axes of I/O. |
| Connections |
Provides 68 numbered screw clamp terminals arranged in two rows of 34 for easy access to the individual pins of the 68 pin SCSI cable used with MultiFlex PCI Series controllers. |
| Case Dimensions |
77.5 mm (W) x 191.2 mm (L) x 51 mm (H)
(3.1" x 7.53" x 2.0") |
| Use With |
Any MultiFlex PCI series motion controller. Or with any MultiFlex ETH 1040, 1400, 1440 and 1802 motion controller when using the ICN-100 SCSI Interconnection Board. Can also be used with DCX-PCI300-H series motion controllers (contact PMC factory for the appropriate pin-out documentation). |
Interconnection Boards for MultiFlex Etherent Series Motion Controllers
|
ICN-100 Plug-on SCSI Interconnection Board |
|
ICN-100: Plug-on SCSI
Interconnection Board
(100% pin-compatible with
MultiFlex PCI series
connectors and pin-outs)
(click image to enlarge)
|
Part Number |
ICN-100 |
| Description |
Plug-on SCSI interconnection board - MultiFlex PCI pin-compatible. |
| Connections |
Four HD68 SCSI connectors that are 100% pin-compatible with the MultiFlex PCI series controllers - ideal for prototyping and for users of the MultiFlex PCI Series. Additional 37-pin and 15-pin Female D-sub connectors provide an alternative means of accessing the 32 general-purpose digital TTL I/O and 8 optional analog inputs. |
|
Note: The ICN-100 offers access to a subset of the MultiFlex ETH 1000 series I/O that corresponds exactly to the MultiFlex PCI 1000 series I/O. It does not offer access to I/O offered exclusively on the MultiFlex ETH 1800 or MultiFlex ETH 1840. For those models ICN-125 or a custom interconnection board is required to access all I/O. For more information, see the ICN-100 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
| Dimensions |
118.3 mm (W) x 108 mm (L) x 34.3 mm (H)
(4.66" x 4.25" x 1.35") |
| Use With |
Any MultiFlex ETH 1040, 1400, 1440 and 1802 motion controller with ADAM-3968 wiring terminal board and SCSI cables. Not compatible with MultiFlex ETH 1800, 1840, and 1080 models. |
|
ICN-120-0 Plug-on D-sub Interconnection Board |
|
ICN-120-0: Plug-on D-sub
Interconnection Board
(click image to enlarge)
|
Part Number |
ICN-120-0 |
| Description |
Plug-on D-sub interconnection board for applications with up to 4 analog servo AND/OR 4 open-loop stepper axes. |
| Connections |
Four 25-pin Female D-sub connectors for all axis I/O, one 37-pin Female D-sub connector for 32 digital TTL I/O and one 15-pin Female D-sub connector for 8 optional analog inputs. For more information, see the ICN-120 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
| Dimensions |
118.3 mm (W) x 108 mm (L) x 34.3 mm (H)
(4.66" x 4.25" x 1.35") |
| Use With |
Controller P/N: MFX-ETH-1040-0, -1040-2, -1400-0, -1400-2, -1440-0, -1440-2 |
|
ICN-120-1 Plug-on D-sub Interconnection Board |
|
ICN-120-1: Plug-on D-sub
Interconnection Board
(click image to enlarge)
|
Part Number |
ICN-120-1 |
| Description |
Plug-on D-sub interconnection board for applications with up to 4 closed-loop pulse axes (stepper or servo) but NO analog servo axes |
| Connections |
Four 25-pin Female D-sub connectors for all axis I/O, one 37-pin Female D-sub connector for 32 digital TTL I/O and one 15-pin Female D-sub connector for 8 optional analog inputs. For more information, see the ICN-120 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
| Dimensions |
118.3 mm (W) x 108 mm (L) x 34.3 mm (H)
(4.66" x 4.25" x 1.35") |
| Use With |
Controller P/N: MFX-ETH-1040-1, -1040-3 |
|
ICN-120-3 Plug-on D-sub Interconnection Board |
|
ICN-120-3: Plug-on D-sub
Interconnection Board
(click image to enlarge)
|
Part Number |
ICN-120-3 |
| Description |
Plug-on D-sub interconnection board for applications with up to 8 closed loop axes. |
| Connections |
Eight 25-pin Female D-sub connectors for all axis I/O, one 37-pin Female D-sub connector for 32 digital TTL I/O and one 15-pin Female D-sub connector for 8 optional analog inputs. For more information, see the ICN-120 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
| Dimensions |
118.3 mm (W) x 108 mm (L) x 34.3 mm (H)
(4.66" x 4.25" x 1.35") |
| Use with |
Controller P/N: MFX-ETH-1440-1, -1440-3
Can also be used with controller P/N: MFX-ETH-1040-0, -1040-1, -1040-2, -1040-3, -1400-0, -1400-2, -1440-0, -1440-2.
Can be used with other MultiFlex ETH 1000 Series models with possible I/O limitations. For more information, see the ICN-120 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
|
ICN-125 Plug-on D-sub Interconnection Board w/Opto's |
|
ICN-125: Plug-on D-sub
Interconnection Board
with opto-isolated inputs
(click images to enlarge)
|
Part Number |
ICN-125 |
| Description |
Plug-on D-sub interconnection board with 16 additional opto-isolated inputs and 4 additional open-collector outputs (These are provided in addition to the 16 opto-isolated inputs and 20 open-collector outputs offered standard on all MultiFlex ETH controller boards.) Designed for use with MultiFlex ETH 1800 & 1840 controller models. |
| Connections |
Eight 25-pin Female D-sub connectors for all axis I/O, one 37-pin Female D-sub connector for 32 general purpose digital TTL I/O and one 15-pin Female D-sub connector for 8 optional analog inputs.
The bottom 4 connectors include 16 additional opto-isolated digital input channels that can be assigned to axis I/O functions such as home, limit and amp enable inputs, plus 4 digital open-collector outputs which provide amplifier enable signals for 4 additional axes. For more information, see the ICN-125 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
| Dimensions |
118.3 mm (W) x 108 mm (L) x 34.3 mm (H)
(4.66" x 4.25" x 1.35") |
| Use With |
Controller P/N: MFX-ETH-1800-0, -1800-2, -1840-0, -1840-2.
Or with MFX-ETH-1440-0, -1440-1, -1440-2, -1440-3 if more than 16 (up to 32) opto-isolated inputs are required for axis I/O (for home, limit, amplifier fault... etc.) |
|
ICN-126 Plug-on D-sub Interconnection Board w/Opto's |
|
ICN-126: Plug-on D-sub
Interconnection Board
with opto-isolated inputs
(click images to enlarge)
|
Part Number |
ICN-126 |
| Description |
Plug-on D-sub interconnection board with 16 additional opto-isolated inputs and 4 additional open-collector outputs (These are provided in addition to the 16 opto-isolated inputs and 20 open-collector outputs offered standard on all MultiFlex ETH controller boards.) Designed for use with MultiFlex ETH 1080 controller models. |
| Connections |
Eight 25-pin Female D-sub connectors for all axis I/O, one 37-pin Female D-sub connector for 32 general purpose digital TTL I/O and one 15-pin Female D-sub connector for 8 optional analog inputs.
The bottom 4 connectors include 16 additional opto-isolated digital input channels that can be assigned to axis I/O functions such as home, limit and amp enable inputs, plus 4 digital open-collector outputs which provide amplifier enable signals for 4 additional axes. For more information, see the ICN-125 pinout diagrams in the MultiFlex ETH 1000 Series Installation Manual |
| Dimensions |
118.3 mm (W) x 108 mm (L) x 34.3 mm (H)
(4.66" x 4.25" x 1.35") |
| Use With |
Controller P/N: MFX-ETH-1080-0, -1080-1, -1080-2, -1080-3. |
|
ICN-xxx Custom Plug-on Interconnection Boards |
|
ICN-xxx: Custom Plug-on
Interconnection Board
|
Part Number |
ICN-xxx (custom part number will be assigned) |
|
Description |
Custom-designed plug-on interconnection boards can be easily designed by the user or by PMC. |
| Connections |
As specified by customer |
| Dimensions |
As specified by customer |
| Use With |
Any MultiFlex ETH 1000 series motion controller |
|
ICN-130 DB25 Screw-Terminal Board |
|
ICN-130: DB25 Screw-Terminal Board
ICN-130 connected to ICN-120 Series Interconnection Board on a MultiFlex Ethernet Series controller
(click images to enlarge)
|
Part Number |
ICN-130 |
| Description |
25-pin Male D-subminiature (DB25) to screw-terminals. Provides convenient screw terminal access to the 25-pin D-sub axis connectors on the ICN-120/125 series plug-on D-sub interconnection boards. Can be mated directly to the ICN-120/125 series interconnection boards or connected via a standard DB25 extension cable such as CBL-DB25. One board accomodates 1 to 2 axes of I/O (1 servo axis and 1 stepper axis). |
| Connections |
One 25-pin Male D-subminiature connector on board edge. 1 x 5-place and 2 x 10-place screw-terminal strips on board face. |
| Dimensions |
57.25 mm (W) x 67.49 mm (L) x 12.19 mm (H)
(2.26" x 2.66" x 0.48") |
| Use With |
Any D-sub interconnection board P/N: ICN-120-0, ICN-120-1, ICN-120-3 or ICN-125. One ICN-130 can be used on each DB25 connector (1 to 2 axes of I/O for each ICN-130) |
|
ADAM-3968 Wiring Terminal Board |
|
ADAM-3968: Wiring Terminal Board
for the MultiFlex family of controllers
(click image to enlarge)
|
Part Number |
ADAM-3968 |
| Description |
Low-cost universal 68-pin SCSI wiring terminal board with DIN-rail mount. One ADAM-3968 accommodates up to 2 axes of I/O. |
| Connections |
Provides 68 numbered screw-terminals arranged in two rows of 34 for easy access to the individual pins of the 68 pin SCSI cable used with the ICN-100 interconnection board. |
| Case Dimensions |
77.5 mm (W) x 191.2 mm (L) x 51 mm (H)
(3.1" x 7.53" x 2.0") |
| Use With |
ICN-100 SCSI interconnection board and MultiFlex SCSI cables |
Interconnection Boards for DCX-PCI Series Motion Controllers
Interconnection Breakout Board for the DCX-PCI-300-H (High-density SCSI cable version)
|
DCX-BF3XX-H Servo Interconnection Board |
|
DCX-BF3XX-H: Interconnection Board
for DCX-PCI-300-H Motion Controller
(click image to enlarge)
|
Part Number |
DCX-BF3XX-H |
| Connections |
Quick release "cage-clamp" terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
| Input Connector |
26-pin Male IDC ribbon cable header. |
| Mounting |
Via mounting holes on the PCB or DIN rail clips |
| Dimensions |
PCB: 216 mm x 72 mm (8.44 inches x 2.81 inches), Overall: 216 mm x 78.4 mm (8.44 inches x 3.06 inches) |
| Use With |
Controller P/N: DCX-PCI300-H |
|
ADAM-3968 Wiring Terminal Board |
|
ADAM-3968: Wiring Terminal Board
for the MultiFlex and DCX-PCI300-H controller families
(click image to enlarge)
|
Part Number |
ADAM-3968 |
| Description |
Low-cost universal 68-pin SCSI wiring terminal board with DIN-rail mount. One ADAM-3968 accommodates up to 2 axes of I/O. |
| Connections |
Provides 68 numbered screw clamp terminals arranged in two rows of 34 for easy access to the individual pins of the 68 pin SCSI cable used with MultiFlex PCI Series controllers. |
| Case Dimensions |
77.5 mm (W) x 191.2 mm (L) x 51 mm (H)
(3.1" x 7.53" x 2.0") |
| Use With |
Any MultiFlex PCI series motion controller. Or with any MultiFlex ETH 1040, 1400, 1440 and 1802 motion controller when using the ICN-100 SCSI Interconnection Board. Can also be used with DCX-PCI300-H series motion controllers (contact PMC factory for the appropriate pin-out documentation). |
Interconnection Boards for the DCX-PCI-300-R (Ribbon cable version)
|
DCX-BF300-R Servo Interconnection Board |
|
DCX-BF300-R: Interconnection
board for servo motors
|
Part Number |
DCX-BF300-R |
| Connections |
Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
| Input Connector |
26-pin Male IDC ribbon cable header. |
| Mounting |
Via mounting holes on the PCB or DIN rail clips |
| Dimensions |
87 mm x 71 mm (3.4 inches x 2.8 inches) |
| Use With |
Controller P/N: DCX-PCI300-R |
|
DCX-BF360-R Stepper Interconnection Board |
|
DCX-BF360-R: Interconnection
board for stepper motors
|
Part Number |
DCX-BF360-R |
| Connections |
Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
| Input Connector |
26-pin Male IDC ribbon cable header. |
| Mounting |
Via mounting holes on the PCB or DIN rail clips |
| Dimensions |
87 mm x 71 mm (3.4 inches x 2.8 inches) |
| Use With |
Controller P/N: DCX-PCI300-R |
|
DCX-BF320-R Sine Commutating Servo Interconnection Board |
|
DCX-BF320-R: Interconnection
board for brushless commutation
|
Part Number |
DCX-BF320-R |
| Connections |
Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
| Input Connector |
26-pin Male IDC ribbon cable header. |
| Mounting |
Via mounting holes on the PCB or DIN rail clips |
| Dimensions |
87 mm x 71 mm (3.4 inches x 2.8 inches) |
| Use With |
Controller P/N: DCX-PCI300-R |
Interconnection Boards for the DCX-PCI-100 Motion Controller
|
DCX-BF100 Servo Interconnection Board |
|
DCX-BF100: Opto Isolation and
Interconnection board for servo motors
|
Part Number |
DCX-BF100-x (x = 5 for 5-12V switch inputs, x = 24 for 24-48V switch inputs) |
| DCX-BF100-5 |
For +5 to +12 volt switch inputs |
| DCX-BF100-24 |
For +24 to +48 volt switch inputs |
| Isolated Inputs |
Limit +, Limit -, Coarse Home, Amplifier Fault |
| Status LEDs |
Limit +, Limit -, Coarse Home, Amplifier Fault, User 1, User 2 |
| Jumper Options |
TTL level or Opto isolated inputs, high or low active |
| Connection Options |
Female DB-25 or 2pcs. 14 pin screw terminal strips |
| Used With |
Controller P/N: DCX-PCI100 |
Cables for MultiFlex PCI Series Motion Controllers
|
High-Density 68-pin VHDCI-to-SCSI-II/III SCSI Cables |
|
CBL-VH68-6: High-Density Cable
for the MultiFlex and DCX-PCI300-H controller families
(click image for connector closeup)
|
PMC Part Number |
CBL-VH68-6 (6ft/~2M)
CBL-VH68-12 (12ft/~4M)
Note: One cable accommodates up to 2 axes of I/O. |
| Description |
Industry-standard 68-pin offset 0.8mm VHDCI ("SCSI-5" "Micro-centronics") Male to 68-pin HD68 ("SCSI-3") Male cable assembly. |
| Connections |
Mating connector to MultiFlex PCI card: 68-pin offset 0.8mm VHDCI ("SCSI-5") Male |
|
Mating connector to SCSI interconnection board (ADAM-3968 or other SCSI interconnection board): 68-pin HD68 ("SCSI-3") Male |
| Cable Lengths |
6 ft. (2 Meter) and 12 ft. (4 Meter) cables available directly from PMC. Other lengths are widely available from SCSI cable vendors. Click here for information about alternative sources. |
| Use With |
Any MultiFlex PCI series motion controller. Or with any MultiFlex ETH 1040, 1400, 1440 and 1802 motion controller when using the ICN-100 SCSI Interconnection Board. Can also be used with DCX-PCI300-H series motion controllers (contact PMC factory for the appropriate pin-out documentation). |
Cables for MultiFlex Etherent Series Motion Controllers
|
DB25 Extension Cables |
|
CBL-DB25-3: DB25 Extension Cable
for ICN-120/125/130 series interconnection boards
(click image to enlarge)
|
Part Number |
CBL-DB25-3 (3ft/~1M)
CBL-DB25-6 (6ft/~2M)
Note: One cable accommodates 1 or 2 axes of I/O, depending on motion controller configuration. |
| Description |
Industry-standard shielded 25-pin DB25 Male to 25-pin DB25 Female straight through extension cable. |
| Connections |
Mating connector to ICN-120/125 interconnection boards: DB25 Male |
|
Mating connector to ICN-130 screw terminal board: DB25 Female |
| Cable Lengths |
3 ft. (~1 Meter) and 6 ft. (2 Meter) cables available directly from PMC. Other lengths are available from third party cable vendors. |
| Use With |
ICN-120 series and ICN-125 D-sub interconnection boards and ICN-130 screw terminal board. |
|
High-Density 68-pin SCSI-II/III to SCSI-II/III Cables |
|
CBL-HH68-6: High-Density Cable
for the MultiFlex ETH family of controllers
(click image for connector closeup)
|
Part Number |
CBL-HH68-6 (6ft/~2M)
CBL-HH68-12 (12ft/~4M)
Note: One cable accommodates up to 2 axes of I/O |
| Description |
Industry-standard 68-pin HD68 ("SCSI-3") Male to 68-pin HD68 ("SCSI-3") Male cable assembly. |
| Connections |
Mating connector to ICN-100 interconnection board: 68-pin HD68 ("SCSI-3") Male |
|
Mating connector to external SCSI wiring interconnection board: 68-pin HD68 ("SCSI-3") Male |
| Cable Lengths |
6 ft. (2 Meter) and 12 ft. (4 Meter) cables available directly from PMC. Other lengths are widely available from SCSI cable vendors. Click here for information about alternative sources. |
| Use With |
ICN-100 SCSI interconnection board and ADAM-3968 wiring terminal board |
Cables for DCX-PCI Series
Cables for the DCX-PCI-300-H, high-density connector motherboard and -H version modules
|
High-Density 68-pin VHDCI-to-VHDCI SCSI Cables |
|
CBL-VV68-6: High-Density Cable
for DCX-PCI-300-H Motion Controller
(click image for connector closeup)
|
PMC Part Number |
CBL-VV68-6 |
| Description |
Industry-standard 68-pin offset 0.8mm VHDCI ("SCSI-5" "Micro-centronics") Male to 68-pin offset 0.8mm VHDCI Male cable assembly. Each cable accommodates I/O from up to two plug-in function modules: Two axes of I/O per cable using the standard axis modules, or up to 4 axes of I/O per cable when using the Dual Servo or Dual Stepper Axis Modules.) |
| Connections |
Mating Connector to DCX-PCI-300-H: 68-pin offset 0.8mm VHDCI ("SCSI-5") Male |
|
Mating Connector to Interconnection Board: 68-pin offset 0.8mm VHDCI ("SCSI-5") Male |
| Cable Lengths |
2 Meter (6ft.) cables available directly from PMC. Other lengths (0.5M, 1M, 2M, 3M and longer) are widely available from SCSI cable vendors. Click here for information about alternative cable sources. |
| Use With |
Controller P/N: DCX-PCI300-H. |
|
High-Density 68-pin VHDCI-to-SCSI-II/III SCSI Cables |
|
CBL-VH68-6: High-Density Cable
for the MultiFlex and DCX-PCI300-H controller families
(click image for connector closeup)
|
PMC Part Number |
CBL-VH68-6 (6ft/~2M)
CBL-VH68-12 (12ft/~4M)
Note: One cable accommodates up to 2 axes of I/O. |
| Description |
Industry-standard 68-pin offset 0.8mm VHDCI ("SCSI-5" "Micro-centronics") Male to 68-pin HD68 ("SCSI-3") Male cable assembly. |
| Connections |
Mating connector to MultiFlex PCI card: 68-pin offset 0.8mm VHDCI ("SCSI-5") Male |
|
Mating connector to SCSI interconnection board (ADAM-3968 or other SCSI interconnection board): 68-pin HD68 ("SCSI-3") Male |
| Cable Lengths |
6 ft. (2 Meter) and 12 ft. (4 Meter) cables available directly from PMC. Other lengths are widely available from SCSI cable vendors. Click here for information about alternative sources. |
| Use With |
Any MultiFlex PCI series motion controller. Or with any MultiFlex ETH 1040, 1400, 1440 and 1802 motion controller when using the ICN-100 SCSI Interconnection Board. Can also be used with DCX-PCI300-H series motion controllers (contact PMC factory for the appropriate pin-out documentation). |
Other Sources of High-Density SCSI Cables and Connectors
For customers who wish to purchase high-density SCSI cables in volume directly from a third-party manufacturer or distributor, or for OEM's who wish to design their own custom breakout boards;
Click here for information about alternative cable sources.
Ribbon cables for all standard plug-in modules
|
Ribbon Cables for DCX Motion Controller Family |
|
26-Conductor IDC Ribbon Cable:
For DCX Family of Motion Controllers
(click image to enlarge)
|
Part Number |
95.020.6 - 6 ft. (2M) cable assembly.
95.020.X - X ft. cable assembly. (Custom lengths, lead times will apply.) |
| Description |
Generic 26-conductor IDC Female to IDC Female ribbon cable assembly. Connects DCX Modules to Breakout Boards. |
| Connections |
Mating Connector to Controller Module: 26 pin Female IDC (Insulation Displacement Connector) |
|
Mating Connector to Breakout: 26 pin Female IDC (Insulation Displacement Connector) |
| Cable Lengths |
6 ft. (2M) cables are available from stock. Custom lengths can be built to order, but lead times may apply. See below for information on building your own ribbon cables. |
| Use With |
Controller P/N: DCX-PCI300-R, DCX-PCI100, or any legacy DCX Series motion controller such as DCX-AT300 or DCX-PC100. |
Build Your Own Ribbon Cables
IDC ribbon cable components are inexpensive, widely available and easy to assemble. As a result, most customers choose to buy and assemble these cables themselves.
Components Required
26-conductor ribbon cable (cable only) is available from many manufacturers, including:
- Manufacturer: Belden Corp.
- Part No: 9L28026, or equivalent.
- Description: Box of 100 ft. (30M) 26-conductor ribbon cable.
The mating IDC connectors are also available from several manufacturers, including:
- Manufacturer: Circuit Assembly Corp.
- Part No: 26IDS2-C-SPT-SR, or equivalent.
- Description: 26-pin dual-row IDC Female connector assembly (polarized, with strain relief.)
Note: A small 3-4 inch (8-10cm) mini-vise clamp is useful (though not required) for installing the IDC connector onto the ribbon cable.
Power Supply Options for MultiFlex Ethernet Series Motion Controllers
|
PWR-100 Plug-on DC-to-DC Power Converter Module |
|
PWR-100: DC-to-DC Power Converter
Plug-on Module
PWR-100 mounted on MultiFlex Ethernet motion controller
(click images to enlarge)
|
Part Numbers |
PWR-100-24: Input voltage: 12-36 VDC
PWR-100-48: Input voltage: 24-70 VDC
|
| Description |
Optional DC-to-DC power converter plug-on modules allow users to power a MultiFlex ETH 1000 series controller with a single DC input supply voltage. Eliminates the need for a triple-output power supply such as the PWR-522 shown below. Instead, a single 12-70 VDC input is required. |
| Inputs |
Single DC input: 12-36 VDC (PWR-100-24) or 24-70 VDC (PWR-100-48). Minimum input current: 1 Amp continuous |
| Outputs |
Triple DC outputs: +5, +12, -12 VDC provided to the controller board via mating power connector |
| Connections |
Inputs: 2-position Phoenix screw-terminal sockets - 3.81mm (0.150") pitch. Note: The mating 2-position power input connector is included with every purchase of a PWR-100 converter module.
Outputs: 6-position Phoenix power plug - 3.81mm (0.150") pitch (mates directly to the power input plug on the controller board) |
| Dimensions |
82 mm (L) x 68 mm (W) x 27 mm (H)
(3.23" x 2.68" x 1.06") |
| Use With |
All MultiFlex ETH 1000 series controllers |
|
PWR-522 Triple Output Power Supply |
|
PWR-522: Triple Output
Power Supply
(click image to enlarge)
|
Part Number |
PWR-522 (includes wire harness with CNN-006, 6-position power connector plug) |
| Description |
Triple output power supply - AC mains input (100-120/200-240VAC) to triple DC outputs (+5 & ±12 VDC) required to power a MultiFlex ETH series 1000 controller. |
| Inputs |
Mains AC input: 100-120 or 200-240 VAC |
| Outputs |
Triple DC outputs: +5, +12, -12 VDC |
| Connections |
Inputs & Outputs: Screw-terminals on power supply. The PWR-522 also includes a wiring harness with screw terminal lugs and CNN-006 6-position Phoenix screw-terminal plug which mates to the power input socket on the controller board. |
| Dimensions |
130 mm (L) x 84 mm (W) x 33 mm (H)
(5.12" x 3.31" x 1.30") |
| Use With |
All MultiFlex ETH 1000 series controllers |
|
CNN-006 Power Connector Plug |
|
CNN-006: 6-Position Power Connector Plug
|
Part Number |
CNN-006 (Phoenix Contact P/N: 1803617) |
| Description |
6-Position Power Connector Plug for MultiFlex ETH 1000 series controllers |
| Connections |
Inputs: Phoenix screw-terminal sockets - 3.81mm (0.150") pitch
Outputs: Phoenix power connector plugs - 3.81mm (0.150") pitch |
| Dimensions |
19.05 mm (L) x 15.5 mm (W) x 11.1 mm (H)
(0.75" x 0.61" x 0.44") |
| Use With |
All MultiFlex ETH 1000 series controllers (Note 1: This item is NOT needed when using the PWR-100 plug-on DC-to-DC power converter module - see above. Note 2: The CNN-006 is included at no extra charge with the PWR-522 triple output power supply - see above) |
Mounting Options for MultiFlex Ethernet Series Motion Controllers
|
DIN-800 DIN Rail Mount Housing |
|
DIN-800: Din Rail Mount Housing
(click image to display dimensional drawings)
|
Part Number |
DIN-800
|
| Description |
Optional DIN rail mount housing. Used to mount a MultiFlex ETH 1000 series controller board to a standard DIN rail or to house a MultiFlex Ethernet controller board when exposed on a benchtop. Note: This is a special built-to-order item subject to a minimum order quantity (MOQ). Pease contact PMC for MOQ pricing and lead-time. |
| Includes |
1 main extrusion housing, 2 end caps and 4 phillips-head screws. Assembly required. |
| Assembled Dimensions |
209.6 mm (L) x 127 mm (W) x 37.5 mm (H)
(8.25" x 5.0" x 1.48") |
| Use With |
All MultiFlex ETH 1000 series controllers |
Motion CD
|
Motion CD |
|
PMC Motion CD
|
Part Number |
94-350-A |
| Description |
All PMC software, firmware, documentation and support resources for PMC motion control cards on CD-ROM. |
| Availability |
Shipped free-of-charge with all first-time orders of PMC motion controllers. Additional copies of the Motion CD are available for a nominal shipping and handling charge of $25.00.
Note: All of the software, documentation and support resources available on the Motion CD are also conveniently available for download from our web site 24 hours a day.
|
|
|
