DCX-AT 300 Series Interconnection Boards

	DCX-BF300-R Servo Interconnection Board
DCX-BF300-R: Interconnection board for servo motors	Part Number	DCX-BF300-R
	Connections	Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring.
	Input Connector	26-pin Male IDC ribbon cable header.
	Mounting	Via mounting holes on the PCB or DIN rail clips
	Dimensions	87 mm x 71 mm (3.4 inches x 2.8 inches)
	Use With	Controller P/N: DCX-PCI300-R

	DCX-BF360-R Stepper Interconnection Board
DCX-BF360-R: Interconnection board for stepper motors	Part Number	DCX-BF360-R
	Connections	Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring.
	Input Connector	26-pin Male IDC ribbon cable header.
	Mounting	Via mounting holes on the PCB or DIN rail clips
	Dimensions	87 mm x 71 mm (3.4 inches x 2.8 inches)
	Use With	Controller P/N: DCX-PCI300-R

	DCX-BF320-R Sine Commutating Servo Interconnection Board
DCX-BF320-R: Interconnection board for brushless commutation	Part Number	DCX-BF320-R
	Connections	Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring.
	Input Connector	26-pin Male IDC ribbon cable header.
	Mounting	Via mounting holes on the PCB or DIN rail clips
	Dimensions	87 mm x 71 mm (3.4 inches x 2.8 inches)
	Use With	Controller P/N: DCX-PCI300-R

	DCX-BF022 I/O and Opto-Isolation Boards
DCX-BF022: DCX Digital I /O to Opto 22 or Grayhill Relay Rack interface board	Configuration	Each channel is individually jumper configurable as either input or output. Plugs directly into Opto 22 / Grayhill I / O connector.
	Current Drive	30mA (low level output)