DCX-VM 200 Series Interconnection Boards
|
|
DCX-BF100 Servo Interconnection Board |
|
DCX-BF100: Opto Isolation and
Interconnection board for servo motors
|
DCX-BF100-5 |
For +5 to +12 volt switch inputs |
| DCX-BF100-24 |
For +24 to +48 volt switch inputs |
| Isolated Inputs |
Limit +, Limit -, Coarse Home, Amplifier Fault |
| Status LEDs |
Limit +, Limit -, Coarse Home, Amplifier Fault, User 1, User 2 |
| Jumper Options |
TTL level or Opto isolated inputs, high or low active |
| Connection Options |
Female DB-25 or 2pcs. 14 pin screw terminal strips |
|
DCX-BF160 Stepper Interconnection Board |
|
DCX-BF160: Opto Isolation and
Interconnection board for stepper motors
|
DCX-BF160-5 |
For +5 to +12 volt switch inputs |
| DCX-BF160-24 |
For +24 to +48 volt switch inputs |
| Isolated Inputs |
Limit +, Limit -, Null Position, Home, Aux. Encoder Coarse Home |
| Status LEDs |
Limit +, Limit -, Null Position, Home, Aux. Encoder Coarse Home |
| Jumper Options |
TTL level or Opto isolated inputs, high or low active |
| Connection Options |
Female DB-25 or 2pcs. 14 pin screw terminal strips |
|
DCX-BF022 I/O and Opto-Isolation Boards |
|
DCX-BF022: DCX Digital I /O to
Opto 22 or Grayhill Relay Rack
interface board
|
Configuration |
Each channel is individually jumper configurable as either input or output. Plugs directly into Opto 22 / Grayhill I / O connector. |
| Current Drive |
30mA (low level output) |
| |
|
|
|
