DCX-VM 300 Series Interconnection Boards
|
|
DCX-BF300-R Servo Interconnection Board |
DCX-BF300-R: Interconnection board for servo motors
|
Part Number |
DCX-BF300-R |
Connections |
Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
Input Connector |
26-pin Male IDC ribbon cable header. |
Mounting |
Via mounting holes on the PCB or DIN rail clips |
Dimensions |
87 mm x 71 mm (3.4 inches x 2.8 inches) |
Use With |
Controller P/N: DCX-PCI300-R |
|
DCX-BF360-R Stepper Interconnection Board |
DCX-BF360-R: Interconnection board for stepper motors
|
Part Number |
DCX-BF360-R |
Connections |
Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
Input Connector |
26-pin Male IDC ribbon cable header. |
Mounting |
Via mounting holes on the PCB or DIN rail clips |
Dimensions |
87 mm x 71 mm (3.4 inches x 2.8 inches) |
Use With |
Controller P/N: DCX-PCI300-R |
|
DCX-BF320-R Sine Commutating Servo Interconnection Board |
DCX-BF320-R: Interconnection board for brushless commutation
|
Part Number |
DCX-BF320-R |
Connections |
Quick release terminal strips, grouped by function (motor, primary encoder, auxiliary encoder.) Each terminal pin is individually labeled for easier wiring. |
Input Connector |
26-pin Male IDC ribbon cable header. |
Mounting |
Via mounting holes on the PCB or DIN rail clips |
Dimensions |
87 mm x 71 mm (3.4 inches x 2.8 inches) |
Use With |
Controller P/N: DCX-PCI300-R |
|
DCX-BF022 I/O and Opto-Isolation Boards |
DCX-BF022: DCX Digital I /O to Opto 22 or Grayhill Relay Rack interface board
|
Configuration |
Each channel is individually jumper configurable as either input or output. Plugs directly into Opto 22 / Grayhill I / O connector. |
Current Drive |
30mA (low level output) |
|
|
|
|